中文版  |  ENGLISH
Home About us News Honor Products Equipment Recruitment Message Contact us
Enterprise News
Business bulletin
Industry information
The technical documentation
   Your current position:Home - News
Finishing the stamping process
The publisher:admin Release time:2015-4-15 9:33:53 Reading:64Time

    1, cut open

    Open is a stamping process material along the open partial rather than complete separation of the contour.Be open and separation materials in or in separation

The graphic.

    2, the cutting edge

    Trimming die forming process is the use of trimming the edge of a stamping process, which has a certaindiameter, height and shape.

    3, cut the tongue

    Cut the tongue is a stamping process material along the open partial rather than complete separation of thecontour. Is a partial separation of the workpiece material, have certain requirements

Position, no longer at the front of the plane separation.

    4, cut off

    The material is cut along a stamping process open contour separation, the separated materials into the workpiece and workpiece.

    5, the counter - drawing

    Reverse drawing is a drawing process of hollow workpiece inner wall of hallux valgus.

    6, expanding

    The flaring is hollow or tubular member of a stamping process open outward expansion.

    7, punching hole

    Punch will be waste materials or processes from the isolated part of a stamping process along the closedcontour, the needed materials or processes a hole.

    8, the lack of

    Piercing is the waste materials or processes from the isolated part of a stamping process along the contouroutline of the formation of open, open the gap width, depth of not more than.

    9, the blanking

    Die blanking is to use some of the material or process conditions and other materials, engineering(sequence) of a stamping process or pieces of waste separation. Blanking is cutting 1,

In general, blanking, punching, punching, cutting, deficiency, chisel, edge cutting, cutting, cutting, trimmingthe tongue in the separation procedure.

    10, notching

    Punching is the waste materials or processes from the isolated part of a stamping process along the contouroutline of open, open a groove, the depth over width.

 
 

Print this page || Close

Copyright: Qingdao North Industrial Co. Ltd. 

业务洽谈
点击这里给我发消息
业务咨询
点击这里给我发消息
阿里在线
点击这里给我发消息
阿里在线
点击这里给我发消息